Cookie Img
Send SMS
+919821614864
Home » Products » BASF

BASF

MASTER BRACE 2200(A+B)
close
MASTER BRACE 2200(A+B)
1
MasterBrace ADH 2200 is a non slumping epoxy bedding compound and adhesive. It is a two pack, fine aggregate filled, fast curing material, ideal for a variety of bedding, gap filling and concrete repair applications. MasterBrace ADH 2200 is a stiff but easily workable compound that can be applied by either trowel, spatula or knife. It cures to give high mechanical properties typical of epoxy compounds. It is resistant to oils, greases, petroleum, salts, many acids and alkalis and most commonly met corrosive media. It does not shrink on curing, and is designed to be used when cured from below freezing point to 60°C. Its impact resistance, and mechanical strength is greater than that of concrete.
MASTERLIFE CI 220
close
MASTERLIFE CI 220
1
MasterLife CI 220 is a state-of-the-art, dual mechanism, corrosion-inhibiting admixture formulated to inhibit the corrosion of steel in reinforced concrete. MasterLife CI 220 provides dual corrosion protection, for concrete and steel, making it the most effective corrosioninhibiting admixture available.
MASTER EMACO S348
close
MASTER EMACO S348
1
MasterEmaco S 348 trowelable mortar is a dual shrinkage compensated, thixotropic high strength formulation for structural concrete repairs. MasterEmaco S 348 is suitable for placing in thicknesses of 12mm to 50 mm both vertically and overhead. MasterEmaco S 348 provides a durable, strong structural repair fully compatible with host concrete.
MASTER BRACE 1414
close
MASTER BRACE 1414
1
MasterBrace ADH 1414 is a permanent epoxy adhesive for internal or external bonding of renderings, granolithic toppings, and concrete to concrete. It tolerates a degree of moisture before and during curing and is insoluble when cured. The ultimate bond strength is greater than the tensile strength of concrete. MasterBrace ADH 1414 does not shrink and provides an even and stress-free bond.
master brace 1315
close
master brace 1315
1
MasterInject 1315 is a low viscosity epoxy resin based crack injection resin system long mixed potlife designed for sealing cracks in concrete and restoring its structural integrity.
Floor hardner
close
Floor hardner
1
MasterTop 100 is a pre-mixed powder designed to be applied as a dry shake over freshly floated concrete floor. MasterTop 100 creates an aesthetically pleasing, coloured floor with significantly improved abrasion resistance. It is based on selected hard wearing mineral aggregates blended with alkali and light fast pigments and hydraulic binders. MasterTop 100 is available in various standard colours.


Back to top